As the owner of a rear projection TV, Digital Light Processing, DLP, or use, it has the advantage over owners of TV the other hand, if you notice that the image begins to darken, you can take simple repairs yourself. Replacing a lamp in the set is not hard to do, and you will save money that otherwise goes to a craftsman. Overall picture on the screen only needs to be vigilant, and know when it's time to work.
First things first: make sure you have thecorrected for the lamp unit. For example, if you have one of the following models of Toshiba, make sure you have a Toshiba TB25 LMP Lamp:
46HM84 46HM94 46HM94P 46HMX84 52HM84 52HM94 52HMX84 52HMX94 62HM14 62HM15 62HM84 62HM94 62HMX84 62HMX94
Before replacing the bulb, it is important to ensure that the television was on for at least 30 minutes and cool on. Want to potential injury and damage preventiondetermined. It 'best to make sure that the device was not used in a while before the lamp to re-open with a screwdriver. The jury, which holds the lamp is usually marked and square - if you have a sketch of your set, applies first.
Replacing the lamp is not hard to do - it's just a matter of gently pulling the lamp used with its accommodation and the insertion of the replacement. Before placing the new lamp, but make sure the area left clean. Use aMicrofiber cloth to wipe the excess powder.
Once the new lamp is placed, you must restore all the settings of the TV, unplug the lamp needed to do. After that is finished, the TV is like new, and you can enjoy your favorite shows again!
No comments:
Post a Comment